PAPERWORK steps (in order)
LIVE-Weather Webcams--Check out the weather for deployments
Submit Resume-Join Us
Hurricane/Wind Damage-- Tarping tools -STINGER Cap Nailer VS BOSTICH cap stapler www.LadderAssist101.com
STINGER Cap Nailer VS BOSTICH cap stapler
Installing large tarps for hurricanes, you must have one of these cap guns and we tend to go with the STINGER CAP NAILER. Purchase these in the EARLY FALL when the hurrincanes start to come into the USA. This will make your life so easy, and make you a TON OF money without the trouble. THE STINGER IS THE CLEAR WINNER!
BOTH NEED:
- Pancake compressor to power these cap nailers but they are excellent at putting down large tarps on siding or roofs.
- Rolls of Cap Nails that come by the box
STINGER CN100B---Excellent rating and we go with the Stinger because of the speed and ease of use. (Both need a compressor to power them with hose)
- Installs 1" max nails as well as a cap-- $44.48 per case of cap nails for the Stinger
- Tool holds 200 caps and 200 nails for fewer reloads on the job site
- Features bumpfire and sequential firing modes, 360° tool-free exhaust, tool-free depth of drive
- The CN100B comes with a belt hook, air fitting, and a carrying case
- Use exclusively with STINGER 1” (25mm) NailPac, plastic collated caps and ring shank nails
--------------------------------------------
STINGER CN100B Pneumatic Cap Nailer--$290
- The product is manufactured in China
- Internal air filter for maximum reliability
- Selectable trigger operation converts from sequential to contact operation
- Adjustable depth of drive sets staples to the desired depths quickly and conveniently
- Designed to be the preferred method of securing felt housewrap and thin foam to framing
- 20 percent lighter than the existing model
BOSTITCH Cap Stapler, 18GA (SL1838BC)--$220
CLICK HERE TO BUYON AMAZONThe Bostitch-- uses Cap STAPLES, also available online by the caseBOSTITCH caps for use with the sb150slbc-1 cap Stapler and n66bc-1 cap nailer
- 1-Inch plastic caps eliminate pull-through when installing felt, house wrap and foam board insulation
- The cap method proves to be 10 times faster than nailing by hand
BUY HERE https://www.amazon.com/BOSTITCH-SBCAPS-1000-Stapler-Nailer
DEWALT FLEXVOLT 60V MAX Air Compressor Kit, Cordless, 2.5 Gallon (DCC2560T1)-- $299 (And worth every penny)
- PURCHASE 2-- BATTERY PACKS FOR this compressor, as you will need both for larger tarp jobs.
- WIND CLAIMS and large wind events, this will make you look like a pro
- INCREASE YOUR BILLING with TARPING for most major carriers
- Will need 100 FEET of hose (HARBOR FREIGHT) --Dont purchase at Lowes/Home Depot
Navigation and GPS and PhotoBlocker for Ladder Assist www.LadderAssist101.com
Purchase the REFLECTOR COVER
The Reflector™ helps prevent costly tickets. Made of a high quality clear plastic cover that is coated with light reflecting crystals. The Reflector™ overexposes photo radar and red light camera pictures by reflecting flash back to the camera blinding it.If they can't read your tag, you don't get a ticket."How does the Reflector™ Cover work? The light reflecting particles imbedded in the Reflector cover act as miniature mirrors helping to reflect the power full flash from a red light or speed camera.The result is an over-exposed and unreadable picture that prevents a costly ticket. $29.99 COST Take it from us we have used all of these methods and the Reflector Cover is the best and the police cant tell that you have it on your license plate |
- Inconspicuous to the Naked Eye.
No plate distortion when viewed at an angle. - Very Effective
- Quick & Easy Installation
Pays for itself the first time it works.
Buy it before you get a ticket
Truck/Large SUV vehicle suggestions for ladder assist www.LadderAssist101.com
VEHICLE: BUY THE MOST FUEL EFFICIENT TRUCK/ Large SUV (this is your biggest cost of the year)
- Buy the truck with the BEST GAS MILEAGE
- Must be DEPENDABLE to travel long distance
- Get AAA annual coverage in case breakdowns (aprox $75 per year) WORTH EVERY PENNY if you breakdown for FREE TOWING https://membership.aaa.com/
- MUST HAVE LADDER RACK to transport the 32 foot ladder, TRAK RAK good ladder
- MUST BE ABLE TO TRANSPORT A 32 FOOT ALUMINUM LADDER
- LOWES AND HOME DEPOT have ladder racks that will work to transport the 32 foot ladder LOWES ladder racks
- BUY a USED TRUCK 1-2 YEARS OLD because you will definitely be putting a large amount of miles on the odometer.
LADDERS needed to become Ladder Assist- 32' REQUIRED--"Green Tipped 225 lbs, or Blue Tipped 300lbs ladder" www.LadderAssist101.com
32 FOOT LADDER is required on every ladder assist. Insurance carriers hire us for high and steep claims so we ALWAYS need the 32 foot ladder. Here are a few choices.
The BEST magnetic hammer in the industry--"MUST HAVE" Equipment for any ladder assist www.LadderAssist101.com
"AJC Mag-Hatch Magnetic Faced Roofing Hatchet"
- MAGNETIC TIP-- pickup up cap nails automatically
- Can lift shingles for brittle tests with the hatchet side
- Can lift shingles to tarp underneath the shingles to prevent future leaking
- No more hitting your fingers holding a nail
- THIS WILL BE THE LAST HAMMER YOU EVER BUY as a ladder assist and it will MAKE YOU MONEY.
- www.LadderAssist101.com ***Now HIRING IN NORTH AND SOUTH CAROLINA- as well as CAT positions in all states - www.LadderAssist101.com #CarolinasLadderAssist
POWER outage maps (areas with recent storms for possible deployments)
https://poweroutage.us/area/regions
https://poweroutage.us/area/state/california
States with most storm events
Travel

in your truck, and you are responsible for all costs for maintenance, gas, tolls and gas cost getting to the events. Once you are deployed to area, your travel will be relatively small compared to getting to the event.
Steep Roof Assist? The Goat vs RidgePro www.LadderAssist101.com
THE GOAT (winner) vs RIDGEPRO
Steep roofs from 10/12 and above will require some help to safely access the very steep roofs. After having accessed thousands of roofs here are 2 pieces of equipment used around the country.
RIDGEPro $499 price
- Good on all types of roofs and can be used on the hips as well
- Has a rope and a pole so you can move around
- If you can't get the hook to the ridge, this tends to be more dangerous
- Small enough and wont take up much room in truck
- $499 price https://www.theridgepro.com/
Hyper-Organize your truck www.LadderAssist101.com
Hyper-Organize your truck
The best equipment in the field is make sure you are extremely organized in your truck. Your truck is your more important tool (besides yourself) and techs spend the majority of time in them.
Here are a few tips to keep organized:
- Travel with as little as possible, the more stuff in your truck the worse it is to get organized
- Color code boxes to take with you on the road
- Use the DECKED system to organize and secure the back of your pickup truck Check out Decked organization system here
- Tool box that is lockable in the back
- https://decked.com/
- Keep the boxes of Chalk in the box
- Keep garbage bags under the seats to get rid of garbage daily.
- Make sure you ALWAYS have 3 of everything you will need for your job. Railroad Chalk, PITCH GAUGE, shingle gauges, cougar paw pads, business cards, TAPE MEASUREs (get cheap backups at HARBOR FREIGHT to give to the adjusters https://www.harborfreight.com/
- ORGANIZE/ORGANIZE/ORGANIZE and de-clutter will keep you on top if your game.
- DO NOT SHOP at Home Depot or Lowes unless you have to, https://www.harborfreight.com/ is HALF or more the cost of these places
What cell phone or tablet do ladder assist use?
What cell phones do you use in the field as ladder assist?
Best Weather websites for Ladder Assist/Adjusters www.LadderAssist101.com
Best Weather websites for Ladder Assist/Adjusters
Beginner's Guide-- How to Safely Use an Extension Ladder -Simplified Safety article
Extension ladders: who hasn’t used one to access the roof of their home, praying every moment that it won’t fall back, slip to the side, or just buckle under your weight? A tool so common can still be extremely dangerous and the facts are alarming:
- The United States leads the world in ladder deaths. Each year more than 164,000 people are treated from ladder injuries in the emergency room and more than 300 die from falls from ladders.
- Most ladder deaths are from falls of 10 feet or less.
- The number of fatalities resulting from falls from ladders has tripled in the past few decades.
Now, these are not work-related statistics, these are from all ladder use. The point is, ladders can be dangerous when not used properly and that applies both at work and in the home. So, what is the proper way to use a ladder?
Choose the Right Ladder and Inspect It
How high are you going? How much do you weigh? What kind of room do you have? Are there electrical wires nearby? All of these questions and more will be answered if you do the proper planning! The first way to ensure your safety is to pick the right ladder. The length of the ladder you buy is the maximum length it will extend to. It can be used at any height (in approximately 1’ increments) between the maximum length and half the maximum length (fully retracted). Know the height you are climbing so you can choose the proper ladder. Then, ensure it is designed to support the weight you intend to place on it. There are five classes of extension ladders as shown in the chart below:
Set the Ladder Up ProperlyWhen selecting the class of ladder you’ll be using, keep in mind that the weight limit applies to you AND all the material/tools you will have with you.
And, where are you using this ladder? Does the area lend itself more to a stepladder because there’s nothing good to lean your extension ladder against? Is the footing solid and level enough? Look for electrical wires in the vicinity. If there are any, avoid aluminum ladders and, regardless of type, keep all ladders at least 10 feet away from energized lines.
Once all of this is decided, get your ladder and inspect it. Never take for granted that a ladder is in the condition it is supposed to be in. Ladders get left in all kinds of weather, they get dropped, they get hit, and countless other things. Make sure that there are no dents in the rungs or other damage. Make sure they side rails are not bent or damaged. Ensure the safety feet are in place, as well as the ladder’s lanyard. Make sure the locking mechanisms are in place and all labels are legible. Make sure there is no slippery material on the ladder. And, if the ladder has been modified in any way, do not use it. OSHA requires that this inspection be done by a Competent Person, which means they must have the knowledge to recognize a hazard and the authority to correct it. If this is not you, then you must find out who your company’s Competent Person is and ensure they inspect it before use.
Sure, now that you’ve got the right ladder you could just throw your ladder up against something and hope for the best, but that probably won’t end well. Take the time to set it up the way it’s supposed to be set up. Start by leaning the ladder at a 4:1 ratio. This means that for every four feet of height between the base and where the ladder makes contact with the structure you’re leaning against, the base needs to be one foot away. Like this:
A quick and easy way to tell if you’ve set the ladder up at (approximately) the correct angle is to stand with the tips of your toes touching the base. If you extend your arm and your fingertips are touching a rung then it’s about where you need it to be. This will help keep the ladder from tipping backwards as you climb it.
What kind of surface are you setting up on? See those swiveling feet at the bottom of your ladder? They have a purpose! If you are on a hard, flat surface, those feet should stay flat. The bottom of these feet helps your ladder to stay in place. If you are on a softer surface, you should tip those feet up and dig the tips into the ground to help secure your ladder.
Once you’ve established the angle and set the feet, secure the ladder. This could require somebody to climb it, so make sure you have a second person or more available to help steady the ladder while this is done. If you’re going to use an off-the-shelf product to secure your ladder, make sure that it’s OSHA compliant. Some stabilizers on the market, for instance, are not. It would be a shame to try to do the right thing only to fall short of compliance based on product selection.
Before you secure the ladder, ensure that it extends three feet above the level you are climbing. If you remember that rungs tend to be a foot apart, it’s easy to ensure your ladder is set up right with just a glance at the top. This three-foot rule gives a person descending the ladder from the higher level something to grab on to as they climb on without having to lean over at the edge of the roof. However, this three feet of ladder sometimes poses a problem because people getting onto or off of the ladder at the top have to work their way around the ladder itself. This transition does lend itself to accidents. There are products on the market called ladder extensions that allow the user to step through the top three feet of ladder rather than around. These products attach to the top of the ladder and are basically an extension of the side rails without the rungs. Remember, the point of the three-foot rule is to give the user a place to hang onto, so if extending the ladder three feet is not feasible, a three-foot-high handhold is required.
Finally, make sure the area around the base is clear. The last thing you need is to safely climb down the ladder, only to step into a hole or onto some debris and turn your ankle and fall.
Use it Properly

First, face the ladder. Don’t be fancy. Don’t be distracted. Just grab the ladder with your hands and ascend it while facing it. You should maintain three points of contact with the ladder at all times and your center of gravity should be between the side rails. In order to maintain three points of contact, you will need to keep both feet and a hand on the ladder as you reach up for the next rung or both hands and a foot on the ladder as you step up (don’t be nervous, this is most likely how you already climb a ladder). The key to this, though, is to make sure you are not carrying anything. If you need to bring tools with you, they should be on a tool belt, tool vest, or something similar.
Make sure the ladder is locked into place before ascending and always, whether going up or down, check the ladder’s stability before placing your weight on it. Don’t ever move or adjust a ladder while somebody is on it.
Too many people get hurt on ladders every year, don’t become one of them. Understand the tool and how it is properly used before you use it. Sometimes the things we take for granted are the most dangerous things. Read the whole aritical https://simplifiedsafety.com/blog/beginners-guide-how-to-safely-use-an-extension-ladder/
www.LadderAssist101.com ***Now HIRING IN NORTH AND SOUTH CAROLINA- as well as CAT positions in all states - www.LadderAssist101.com #CarolinasLadderAssist
The Lucrative and Often Misunderstood Field of Ladder Assist--Kevin Kramer Linkedin
The Lucrative and Often Misunderstood Field of Ladder Assist
Kevin KramerFollow
Reality Rope Access LLC Rope Access Systems for Pitched Roofing Structures
- 28
- 9
- 0
If you happen to be among the group of people who believe that Ladder Assist is not gaining ground within the Insurance Claims Industry then it is time to take a closer look. Ladder Assist Companies earned in excess of an estimated $350 million in 2014 by gobbling up roof claims assignments that would otherwise be found in the inventories of Property Claims Adjusters. Ten years ago we had only one official Ladder Assist company and that was run by Pilot for Allstate Ins. but today we have:Assist All, Austin SW Ladder Assist, Camco, Certified Ladder Assist, Cornerstone, Delta Claims Svs, First Choice Ladder Assist, GRIP, Hancock Claims Consultants, KMK, Ladder Assist Pro, Ladder Assist Team, Ladder Now, Manta, Maxus, Miller Enterprises, MT Ladder Assist, Property Medic, Southern Roof Tops, Superior Roof Support, TruLine Roof Consultants……and more throwing their hat into the ring every day. The facts are loud and clear, indicating that the growth climate of these service organizations could not be more perfect:
Fact # 1 – The days of the 4/12 Ranch style houses are dead and no longer a part of the modern housing construction industry. Like it or not, the simple but efficient 4/12 pitched Ranch style home roofing system has now been surpassed by mega pitched architectural master works that now dominate the modern housing construction industry. Shame on you (and me) for the foolish assumption that shedding water would always be priority one with respect to roof system design because today’s priority is all about catering to the uneducated masses who want the curb appeal that these cut-up leak monuments provide.Fact # 2 – The majority of Independent Property Adjusters do not have the genetic make-up and appropriate physical attributes to negotiate the physical and psychological demands of hands-free suspension while scoping a roof of 12/12+ pitch. The Ladder Assist solution for this is all about the careful selection of its workforce:Look at a representation of the average Independent Property Adjuster and you will see a 40 – 60 yr old worker that is 50lbs over weight with mild to moderate height phobia, no rope access training, equipment or any form of managed fall protection plan.Look at the average Ladder Assist worker and you will see a 20 – 40yr old, fearless worker, of appropriate height to weight ratio, appropriately trained, equipped, and supervised within a legitimate managed fall protection program.
Fact # 3 LIABILITY, LIABILITY, LIABILITY Ladder Assist organizations manage their liability in several different ways:For liability resulting from personal injury they use an independently contracted work force that is required to provide their own individual LLC. Simply put, if you own your own company then you are your own employee and therefore exempt from OSHA 1926.5 “General Duty Clause” regulation for providing fall protection. Furthermore, many LA organizations also require their workers to provide their own workman’s comp insurance.For liability resulting from damage to people and property, LA organizations require each independently contracted worker provide their own two million dollar liability policy that specifically names LA organization and provides a shield for their clients in the event of an injury or damage related incident.For liability from lawsuits resulting from meritless work product the LA companies guarantee that all information on the roofing system will be gathered from the roofing system and appropriately reviewed for compliance prior to being handed over to insurance adjuster…QUESTION: How does the responsibilities of a Ladder Assist worker compare with the responsibilities of a Property Claims Adjuster?
ANSWER: Very similar with respect to gathering all pertinent information about the roofing system needed to justify claim payment decisions. Some LA contracts have even expanded to include gathering information related to lower elevation exposures.
Most Ladder Assist workers today are in fact licensed property adjusters that are Haag certified with a solid background related to the roof system claims industry.
I personally (a 16yr Veteran of the Claims Industry) have had the privilege of following some of these LA workers through their daily work routine and what I witnessed was nothing short of astounding:
Hyper organized work trucks prepared with all the tools needed to tackle even the most complicated roof structures.
- ell-orchestrated routines for documenting storm damage (or lack thereof) that seamlessly transfers the merits of roof system conditions to those they serve.
- A “No Structure Is Too Tall or Too Steep” mentality, I literally witnessed a LA worker use his Cougar Paw work boots in the most unique manner TO WALK UNASSISTED UP 28 FOOT OF A 21/12 (60°) PITCHED SLOPE!!!
Add all of this information up and it is easy to see why Independent Adjusters and the IA companies they serve could and in all probability will see more and more of their roof claims disappear from their inventories.
QUESTION: What is the earning potential of a Ladder Assist worker? ANSWER: For the full time LA worker living within a major metropolitan area, affiliate with a reputable LA company around $100K after the deduction for work related expenses however, this can be achieved from home base without all the expenses associated with living on the road. Ladder Assist Companies pay around an average of $100 - $150 per assist however, it is important to note that the work required on a standard storm claim is just a fraction of what is required of a Property Claims Adjuster.My professional opinion on this matter is that the IA industry will eventually take note of this shift and reorganize their own workforce to be more competitive with the service and protection that LA organizations now offer. I would highlight the word "Eventually" because I know that implementing this kind of change will require them to overcome the many barriers of political correctness. Isn’t it funny how gravity favors ability yet cares so little about the details of gender, weight, age and ethnicity....https://www.linkedin.com/pulse/lucrative-often-misunderstood-field-ladder-assist-kevin-kramer - www.LadderAssist101.com ***Now HIRING IN NORTH AND SOUTH CAROLINA- as well as CAT positions in all states - www.LadderAssist101.com #CarolinasLadderAssist
Kevin Kramer
Reality Rope Access LLC Rope Access Systems for Pitched Roofing Structures
JOIN US-Send Resume
Fill out my online form . www.LadderAssist101.com ***Now HIRING IN NORTH AND SOUTH CAROLINA- as well as CAT positions in all states - ww...

-
THE GOAT (winner) vs RIDGEPRO Steep roofs from 10/12 and above will require some help to safely access the very steep roofs. After having a...
-
Fill out my online form . www.LadderAssist101.com ***Now HIRING IN NORTH AND SOUTH CAROLINA- as well as CAT positions in all states - ww...